ModuMoss 200mm kit laid out with 4 poles, anchor pot, face plate and clamps, in brown

ModuMoss Moss Pole Kit – 200mm Poles

2 Poles / Translucent / Pine Green
$72.99
Skip to product information
ModuMoss 200mm kit laid out with 4 poles, anchor pot, face plate and clamps, in brown
  • ModuMoss 200mm kit laid out with 4 poles, anchor pot, face plate and clamps, in brown
  • ModuMoss moss pole sections in Oak, Pine Green and Brown
  • ModuMoss anchor pot colors: Pine Green, Brown, Black and Translucent
  • ModuMoss watering tanks in Oak, Pine Green and Brown
  • ModuMoss plant clamps in Brown, Pine Green and Oak
  • ModuMoss plant clamp sizes: 15mm, 20mm and 25mm stem space, each holding stems up to 21mm wide
  • Screwing two ModuMoss pole sections together
  • Variegated monstera climbing a ModuMoss pole in a translucent anchor pot
  • Plant clamp holding a monstera stem against a moss-filled ModuMoss pole
  • ModuMoss 200mm kit laid out with 4 poles, anchor pot, face plate and clamps, in brown
  • ModuMoss moss pole sections in Oak, Pine Green and Brown
  • ModuMoss anchor pot colors: Pine Green, Brown, Black and Translucent
  • ModuMoss watering tanks in Oak, Pine Green and Brown
  • ModuMoss plant clamps in Brown, Pine Green and Oak
  • ModuMoss plant clamp sizes: 15mm, 20mm and 25mm stem space, each holding stems up to 21mm wide
  • Screwing two ModuMoss pole sections together
  • Variegated monstera climbing a ModuMoss pole in a translucent anchor pot
  • Plant clamp holding a monstera stem against a moss-filled ModuMoss pole
ModuMoss Moss Pole Kit – 200mm Poles

ModuMoss Moss Pole Kit – 200mm Poles

Kit
Anchor Pot Color
Pole & Watering Color
$72.99

Made to order — ships in 5–10 business days.

A complete modular moss pole setup for climbing plants. Choose 2, 3 or 4 poles, add the optional watering tank, then pick a color for the anchor pot and a color for the poles and watering tank.

Every kit includes

  • 1× 6in anchor pot with 27mm face plate. It’s heavier than a typical nursery pot, so it anchors the pole and keeps your plant from tipping as it climbs.
  • 200mm moss poles (2, 3 or 4), each with a 200mm face plate
  • 2× 15mm clamps per pole
  • M3 screws for the 3-hole screw joints

Watering add-on

Choose a “+ Watering” kit to add a 200mm watering tank with cap to help keep your moss moist. It’s printed in the same color as your poles.

Heads-up on the watering tank: 3D prints are built up in thin layers, so you may spot a few beads of water along the print seams and layer lines the first few times you fill the tank. That’s expected, and it typically eases off as you keep using it. The cap never seals completely, either — even screwed down tight, it keeps a gentle drip going so your moss doesn’t dry out.

Specs

  • 200mm pole section: 200mm (7.8in) face plate opening, 225mm (8.8in) total length including the 25mm (0.9in) connector
  • Pole width and depth: 70mm (2.7in) wide × 45mm (1.7in) deep, with a face plate opening about 50mm (1.9in) wide
  • 15mm clamp: holds a stem up to 21mm (0.8in) wide, 15mm (0.5in) out from the face plate
  • Watering tank (+ Watering kits): holds about 450ml (15.2 fl oz); 255mm (10.0in) long including the drip nozzle, 70mm (2.7in) wide × 43.2mm (1.7in) deep
  • Anchor pot: 6in, weighs 7.3oz (207g)

Colors

Anchor pot: Translucent, Pine Green, Oak, Brown, Black
Poles & watering tank: Pine Green, Oak, Brown

Material

3D printed in durable PETG.

Every kit is printed to order in our workshop, so slight variations in color and surface finish are a normal part of the process.

You may also like